YE-218B 双缸鞋面定型机 Instep Moulding Machine 1.    本机适用于女高跟鞋和男女靴类在结帮之前对鞋面的定型作业。 2.    胶模采用耐磨耐热硅胶；外铝模温度可达200℃。 3.    定型后，内衫贴全紧密，不起皱，不变形，不起泡，且可减少破损。 4.    可及时造型打样，减少样品开发时间，降低成本，并能更好的满足客户要求。 5.    鞋背的准确定型更易于前帮机的操作，从而可提高产量。 6.    下模可随意调节而达到不同需要的距度，更贴楦。 7.    双工位设计，更能快速提高生产量。   1.    This aircraft is suitable for the femalehigh-heeled shoes and the male woman's boot class before forming a group toinstep moulding work. 2.    The jelly mold uses the wear-resistingheat-resisting silica gel; Outside the aluminum mold temperature may reach200℃. 3.    After the moulding,in the unlined upper garmentpastes entire close, the corrugation, does not distort, does not bubble, andmay reduce the breakage. 4.    But the prompt modulding pulls, reduces the sampledevelopment time, reduces the cost, and can the better satisfied customerrequest. 5.    The shoes back's accurate stereotypical changeraises the Productivity. 6.    The stamping die may adjust at will achieves thedifferent need the clearance, pastes the shoetree. 7.    The double location design, can enhance theproductivity fast.   Dimensions Voltage Weight Heating System Air pressure 220V/50HZ 0.6MPa